Rear Side Door Replacement

Fig 1: Exploded View Of Door Hinge

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (Enclave) or Rear Side Door Trim Panel Replacement (Acadia/OUTLOOK) or Rear Side Door Trim Panel Replacement (Traverse) .
1	Rear Side Door Hinge Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Remove the water deflector. Support the door before removing the hinge bolts. Disconnect the electrical connector, if equipped. With the aid of an assistant, remove the door. Tighten: 8 N.m (71 lb in)
2	Rear Side Door Hinge Bolt (Qty: 2) Tighten: 8 N.m (71 lb in)
3	Rear Side Door Assembly Tip: When replacing the door it is necessary to transfer all of the internal components.