Front Fender Replacement (Traverse)

Fig 1: Identifying Front Fender Components (Traverse)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the bumper fascia. Refer to Front Bumper Fascia Replacement (Traverse) . Remove the headlamp on the side being replaced. Refer to Headlamp Replacement (Traverse with TVP) . Remove the rocker panel molding. Refer to Rocker Panel Front Molding Replacement (Traverse) .
1	Front Fender Bolt (Qty: 8) CAUTION: Refer to Fastener Caution . Tighten: 3 N.m (25 lb in)
2	Front Fender Procedure: Transfer parts as needed.

Callout

Component Name

Preliminary Procedures

Remove the bumper fascia. Refer to Front Bumper Fascia Replacement (Traverse) .
Remove the headlamp on the side being replaced. Refer to Headlamp Replacement (Traverse with TVP) .
Remove the rocker panel molding. Refer to Rocker Panel Front Molding Replacement (Traverse) .

Front Fender Bolt (Qty: 8)

CAUTION: Refer to Fastener Caution .

Tighten: 3 N.m (25 lb in)

Front Fender
Procedure:
Transfer parts as needed.