LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2010 >> Acadia SLE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - Off Vehicle (4 Of 5)) >> Oil Level Indicator and Tube Installation (LF1 or LFW)

Oil Level Indicator and Tube Installation (LF1 or LFW)

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Level Indicator Tube O-Ring
    GM1583980Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW O-ring on the oil level indicator tube.
  2. Fig 2: Identifying Oil Level Indicator & Tube
    GM2201939Courtesy of GENERAL MOTORS CORP.
  3. Install the oil level indicator and tube (2) by sliding the tube down through the lower crankcase hole.
  4. CAUTION: Refer to Fastener Caution .
  5. Install the oil level indicator tube bracket bolt (1) and tighten to 10 N.m (89 lb in).