Engine Coolant Thermostat Housing Installation (LF1)

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Thermostat Housing Gasket

Courtesy of GENERAL MOTORS CORP.

Install a NEW gasket onto the thermostat housing.

Fig 2: Identifying Thermostat Housing

Courtesy of GENERAL MOTORS CORP.

Install the thermostat housing.

Fig 3: Identifying Thermostat Housing Bolts

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution

Install the thermostat housing bolts. Ensure to install the short bolts (1) and the long bolt (2) in the proper position and tighten to 10 N.m (89 lb in).