Engine Coolant Thermostat Housing Installation (LAU or LBW)

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Coolant Thermostat Housing & Gasket (LAU)

Courtesy of GENERAL MOTORS CORP.

Install the NEW engine coolant thermostat housing gasket (3).
Install the engine coolant thermostat housing (2).

CAUTION: Refer to Fastener Caution .

Install the 3 engine coolant thermostat housing bolts (1) and tighten to 10 N.m (89 lb in).