Seat Belt Retractor Replacement - No. 1 Rear

Fig 1: Identifying Seat Belt Retractor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the body lock pillar upper garnish molding. Refer to Body Lock Pillar Upper Trim Panel Replacement . Remove the rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement (Acadia/OUTLOOK with TB4) or Quarter Lower Rear Trim Panel Replacement (Acadia/OUTLOOK with TB5) or Quarter Lower Rear Trim Panel Replacement (Enclave with TB4) or Quarter Lower Rear Trim Panel Replacement (Enclave with TB5) or Quarter Lower Rear Trim Panel Replacement (Traverse with TB4) or Quarter Lower Rear Trim Panel Replacement (Traverse with TB5) .
1	Rear Seat Shoulder Belt Guide Adjuster Bolt CAUTION: Refer to Fastener Caution . Tighten: 45 N.m (33 lb ft)
2	Rear Seat Shoulder Belt Retractor Bolt Tighten: 45 N.m (33 lb ft)
3	Rear Seat Shoulder Belt Anchor Bolt Tighten: 45 N.m (33 lb ft)
4	Rear Seat Shoulder Belt Retractor Assembly