Front Bumper Fascia Replacement (OUTLOOK)

Fig 1: View Of Front Bumper Fascia

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front compartment sight shields. Refer to Front Compartment Sight Shields Replacement (OUTLOOK) . Remove the front wheelhouse liner. Refer to Front Wheelhouse Front Liner Replacement (OUTLOOK - Traverse) .
1	Front Fascia Screw (Qty: 3) CAUTION: Refer to Fastener Caution . Procedure: Reach underneath the fender to access the bolts. Tighten: 2 N.m (18 lb in)
2	Front Fascia Retainer (Qty: 4)
3	Front Fascia Bracket Screw (Qty: 2) Tighten: 2 N.m (18 lb in)
4	Front Fascia Procedure Drill out the license plate bracket rivets, if equipped. Disconnect any electrical connectors. Transfer parts as needed. Pull forward to remove the front bumper fascia.