LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2009 >> Yukon 2WD V8-5.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 4L60-E/4L65-E/4L70-E Automatic Transmission >> Assemble, Disassemble, and Installation >> Manual Detent Spring Installation

Manual Detent Spring Installation




Manual Detent Spring Installation




1. Inspect the manual detent spring assembly (63) for cracks or damage.
2. Install the manual detent spring assembly (63).

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the manual detent spring bolt (64). Tighten the bolt to 20-27 Nm(15-20 lb ft).

scientia non olet · About LEMON Manuals