LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2009 >> Acadia SLT, FWD >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 6T75 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection >> Removal Procedure

Removal Procedure

  1. Remove the plastic caps from the quick connect fittings by pulling the caps back along the pipe before installation.
    2. Fig 1: View Of J 41623-B & Generator Cooling Inlet Pipe
    GM1195053Courtesy of GENERAL MOTORS CORP.
  2. Install the J 41623-B  onto the transmission oil cooler (TOC) pipe, or use the. See Special Tools .J 28585  . See Special Tools .
    3. Fig 2: Sliding J 41623-B Toward TOC Pipe Fitting
    GM1195054Courtesy of GENERAL MOTORS CORP.
  3. Slide the J 41623-B  toward the TOC pipe fitting, or use the J 28585  . See Special Tools .
    4. Fig 3: View Of J 41623-B On Coolant Pipe
    GM1195056Courtesy of GENERAL MOTORS CORP.
    NOTE: Rotate the J 41623-B  to engage the TOC pipe fitting's retainer slots. See Special Tools .
    The J 41623-B  should be nearly flush with the fitting. See Special Tools .
  4. Connect the J 41623-B  onto the TOC pipe fitting. See Special Tools .
    5. Fig 4: Identifying Retainer Clip
    GM1195059Courtesy of GENERAL MOTORS CORP.
  5. Rotate the J 41623-B  or use the J 28585  until the retainer clip (1) rises above the fitting retainer seat. See Special Tools .
    6. Fig 5: View Of J 41623-B & Generator Cooling Inlet Pipe
    GM1195062Courtesy of GENERAL MOTORS CORP.
  6. Pull back on the TOC pipe to disengage the pipe from the TOC pipe fitting.
  7. Remove the J 41623-B  or the J 28585  from the TOC pipe. See Special Tools .
scientia non olet · About LEMON Manuals