Fluid Cooler Inlet Hose Replacement

Fig 1: Identifying Transmission Fluid Cooler Inlet Hose

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the Air Cleaner Inlet Duct. Refer to Air Cleaner Outlet Duct Replacement .
1	Transmission Fluid Cooler Inlet Hose/Pipe Nut CAUTION: Refer to Fastener Caution . Tighten: 22 N.m (16 lb ft)
2	Transmission Fluid Cooler Inlet Hose/Pipe Clamp Nut Tighten: 22 N.m (16 lb ft)
3	Transmission Fluid Cooler Inlet Hose/Pipe Procedure Remove the transmission line from the clips securing the line to the transmission and fan shroud. Inspect the transmission fluid level. Refer to Transmission Fluid Check .