Control Solenoid (w/Body and TCM) Valve Assembly Removal

Fig 1: Identifying Control Solenoid (w/Body & TCM) Valve Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Control Valve Body Bolt M6 x 80 (Qty: 4)
2	Control Solenoid Valve Spring
3	Control Valve Body Bolt M6 x 65 (Qty: 2)
4	Control Valve Body Bolt M6 x 42 (Qty: 1)
5	Control Valve Body Bolt M6 x 95 (Qty: 3)
6	Control Valve Body Bolt M6 x 55 (Qty: 1)
7	Control Solenoid (w/Body and TCM) Valve Assembly
8	Control Solenoid Valve Assembly Filter Plate CAUTION: Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter plate to the control solenoid valve assembly, resulting in possible damage or contamination. Tip: Discard the filter plate. It is not reusable. Inspect the pressure switch manifold seals for damage. Replace the control valve assembly as necessary.