Input Speed Sensor Installation

Fig 1: View Of Input Speed Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Input Speed Sensor Seal
2	A/Trans Input Speed Sensor Assembly
3	A/Trans Input Speed Sensor Bolt M6 x 25 CAUTION: Refer to Fastener Caution . Procedure: Apply threadlocker GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the input speed sensor bolt. Tip: The seal is coated with a dry lubricant. If the coating is missing, lubricate the seal with automatic transmission fluid prior to installation. Tighten: 9 N.m (7 lb ft)