2-6 and Low-Reverse Piston Function Inspection
2-6 and Low-Reverse Piston Function Inspection
| Callout | Component Name |
|---|---|
| 1 | Case Cover Assembly Tip: The fluid seal rings should be in place and not damaged. |
| 2 | 2-6 Clutch Feed Passage
CAUTION:
Regulate the air pressure to 40 psi maximum. High pressure could cause the piston to over travel and damage the piston seals. Procedure: Apply shop air to the 2-6 clutch feed. Observe the 2-6 piston movement. Tip: Minimal piston movement and excessive air leaking could indicate damage to the 2-6 piston seals or improper assembly. |
| 3 | Low and Reverse Clutch Feed Passage
CAUTION:
Regulate the air pressure to 40 psi maximum. High pressure could cause the piston to over travel and damage the piston seals. Procedure: Apply shop air to the Low and Reverse clutch feed. Observe the Low and Reverse piston movement. Tip: Minimal piston movement and excessive air leaking could indicate damage to the Low and Reverse piston seals or improper assembly. |