Transmission Fluid Cooler Flushing and Flow Test (Outlook): Clean-up
- Disconnect the water supply hose from the SA 9165T: line flusher and bleed any remaining air pressure from the flusher tank.
- Remove the fill cap from the SA 9165T: line flusher and return any unused flushing solution to its container. Rinse the SA 9165T: line flusher with water. Do not store the SA 9165T: line flusher with flushing solution in it.
- After every third use, clean the SA 9165T: line flusher as described in the instructions included with the tool.
- Dispose of any waste water/solution and transaxle fluid in accordance with local regulations.