| Low and Reverse Clutch Assembly (455) |
- Inspect for disengaged or broken Low and Reverse Clutch Retainer (454)
- Inspect for stripped or sheared splines on Low and Reverse Clutch (455)
|
| Low and Reverse Clutch |
- Inspect for stripped or sheared splines on Low and Reverse Clutch Plates (449-453)
- Inspect for damaged, deformed or improper surface finish on the Low and Reverse Clutch Plates (449-453)
|
| Case Cover Assembly (403) |
- Inspect for disengaged or broken Low and Reverse Clutch Piston Spring Retainer (410)
- Inspect for worn, damaged or debonding Low and Reverse Clutch Piston Seals (408)
- Inspect for broken or deformed Low and Reverse Clutch Piston (408)
- Inspect for improperly position or too large bleed hole in Low and Reverse Piston (408)
- Inspect for porosity or improper finish on the Case Cover
|