Leak at the Vent
- Overfilled system
- Water or coolant in the fluid; The fluid will appear milky
- Transmission case porous
- Incorrect fluid level indicator causing an overfilled system
- Plugged vent
| Callout | Component Name |
|---|---|
| 1 | Manual Shift Shaft Seal |
| 2 | Automatic Transmission Vent |
| 3 | Control Valve Body Cover Wiring Connector Hole Seal |
| 4 | Input Speed Sensor Seal |
| 5 | Converter Housing to Case Joint |
| 6 | Front Wheel Drive Shaft Oil Seal Assembly - Case |
| 7 | Torque Converter Fluid Seal Assembly |
| 8 | Torque Converter Assembly |
| 9 | Front Wheel Drive Shaft Oil Seal Assembly - Torque Converter Housing |
| 10 | Control Valve Body Cover Assembly Gasket |
| 11 | Fluid Level Hole Plug |
| 12 | Fluid Pressure Hole Plug |
| 13 | Case Cover Gasket |