Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine

Evaporative Emission Hoses/Pipes Replacement - Engine

Removal Procedure
Caution: Refer to Fuel and Evaporative Emission Pipe Caution (Fuel and Evaporative Emission Pipe Caution) .
Caution: Refer to Gasoline/Gasoline Vapors Caution (Gasoline/Gasoline Vapors Caution) .

Notice: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice (Vehicle Damage Warnings) .




1. Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service) in order to disconnect the evaporative emission (EVAP) hose from the following:

* The throttle body assembly (2)
* The EVAP canister purge solenoid valve (3)

2. Remove the EVAP hose (1) from the engine.

Installation Procedure




1. Position the EVAP hose (1) to the engine.
2. Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service) in order to connect the EVAP hose to the following:

* The throttle body assembly (2)
* The EVAP canister purge solenoid valve (3)