LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2008 >> Canyon 4WD L4-2.9L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 99. Crankshaft Rear Oil Seal Installation

99. Crankshaft Rear Oil Seal Installation



Crankshaft Rear Oil Seal Installation

Tools Required

J 44215 Rear Seal Installer




1. Use the plastic installation sleeve supplied with the new seal when installing a new seal.
Use J 44215 to install the crankshaft rear oil seal.
2. Remove J 44215 .

scientia non olet · About LEMON Manuals