LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2008 >> Canyon 4WD L4-2.9L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 25. Crankshaft Rear Oil Seal and Housing Removal

25. Crankshaft Rear Oil Seal and Housing Removal



Crankshaft Rear Oil Seal and Housing Removal




1. Remove the crankshaft rear oil seal housing and bolts.
2. Install 2 bolts (Jack Screws) into the threaded holes to break the seal of the housing.
3. Remove the crankshaft rear oil seal housing.

scientia non olet · About LEMON Manuals