LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2008 >> Canyon 4WD L4-2.9L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 100. Engine Flywheel Installation >> With Automatic Transmission

With Automatic Transmission



Engine Flywheel Installation (Automatic Transmission)

Tools Required

J 45059 Angle Meter




1. Install the flywheel.

Notice: Refer to Fastener Notice .

2. Install new flywheel bolts.

1. Tighten the new flywheel bolts to 40 N.m (30 lb ft).
2. Use J 45059 to tighten the flywheel bolts an additional 45 degrees.

scientia non olet · About LEMON Manuals