Integrated Accessory Switch Assembly: Service and Repair

Accessory Switch Replacement

Removal Procedure

1. Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Service and Repair) .




2. Remove the fasteners retaining the switch to the trim plate.




3. Remove the switch from the trim plate.

Installation Procedure




1. Install the switch to the trim plate.





Notice: Refer to Fastener Notice.

2. Install the fasteners retaining the switch to the trim plate.

Tighten the fastener to 2.5 N.m (22 lb in).

3. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Service and Repair) .