LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2008 >> Acadia SLT, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Introduction >> Repair Instructions >> Ignition Lock Cylinder Opening Trim Cover Replacement

Ignition Lock Cylinder Opening Trim Cover Replacement

Fig 1: Identifying Ignition Lock Cylinder Opening Trim Cover
GM1852317Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the steering column lower trim cover bolts. Refer to Steering Column Lower Trim Cover Replacement .
1 Ignition Lock Cylinder Opening Trim Cover Bolt (Qty: 2)
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)
2 Ignition Lock Cylinder Opening Trim Cover

Procedure

  1. Unclip the ignition lock cylinder opening trim cover from steering column lower trim cover.
  2. Separate the ignition lock cylinder opening trim cover from the steering column upper trim cover.
scientia non olet · About LEMON Manuals