Instrument Cluster Head Up Display Replacement (Acadia)

Fig 1: Locating Instrument Cluster Head Up Display (Acadia)

GM1853482

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

Preliminary Procedure:
Remove the instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Acadia w/RPO UV6) or Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Acadia w/o RPO UV6) or Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Enclave) or Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Outlook) .

1

Head Up Display Module Bolt (Qty: 4)

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

2

Head Up Display Module Assembly

Procedures

Disconnect the electrical connections.
Refer to Control Module References for programming and setup information.