Center Pillar Upper Garnish Molding Replacement

Fig 1: Identifying Center Pillar Upper Garnish Molding

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the center pillar lower garnish molding. Refer to Center Pillar Lower Garnish Molding Replacement .
1	Center Pillar Upper Garnish Molding Screw NOTE: Refer to Fastener Notice . Tip:  Open the access door to remove the screw. Tighten:  2 N.m (18 lb in)
2	Center Pillar Upper Garnish Molding Assembly Procedure:  Route the seat belt through the molding prior to installing.