Steering Column Opening Filler Replacement (Outlook)

Fig 1: Identifying Steering Column Opening Filler (Outlook)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the hood latch release handle assembly. Refer to Hood Primary Latch Release Cable Handle Replacement .
1	Steering Column Opening Filler Screws (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 in lb)
2	Steering Column Opening Filler Assembly Procedure Disconnect the electrical connections. When replacing the Steering Column Opening Filler, transfer all necessary components.
3	Retainer Clip (Qty: 5)