Steering Column Opening Filler Replacement (Acadia)

Fig 1: Identifying Knee Bolster (Acadia)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the hood latch release handle assembly. Refer to Hood Primary Latch Release Cable Handle Replacement .
1	Knee Bolster Assembly Procedure Disconnect the electrical connections. When replacing the knee bolster, transfer all necessary components.
2	Retainer Clip (Qty: 5)

Callout

Component Name

Preliminary Procedure:
Remove the hood latch release handle assembly. Refer to Hood Primary Latch Release Cable Handle Replacement .

Knee Bolster Assembly

Procedure

Retainer Clip (Qty: 5)