Front Bumper Fascia Replacement (Enclave)

Fig 1: Identifying Front Bumper Fascia (Enclave)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Raise and support the vehicle with suitable safety stands. Refer to Lifting and Jacking the Vehicle . Remove the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement (Acadia) or Front Compartment Sight Shields Replacement (Enclave) or Front Compartment Sight Shields Replacement (OUTLOOK) .
1	Front Fascia Bolt (Qty: 8) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Front Fascia Retainer (Qty: 4)
3	Front Fascia Procedure Drill out the license plate bracket rivets, if equipped. Disconnect any electrical connectors. Transfer parts as needed. Pull forward to remove the front bumper fascia.