Transaxle Brace Replacement

Fig 1: Identifying Transaxle Brace

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the right and left catalytic converters. Refer to Catalytic Converter Replacement - Left Side and Catalytic Converter Replacement - Right Side . Support the transaxle with a transaxle jack.
1	Rear Transaxle Brace Bolt NOTE: Refer to Fastener Notice . Tighten: 50 N.m (37 lb ft)
2	Rear Transaxle Brace Bolt Tighten: 50 N.m (37 lb ft)
3	Rear Transaxle Brace