LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2008 >> Acadia SLT, AWD >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 6T70/6T75 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Automatic Transmission Range Selector Lever Cable Replacement >> Removal Procedure

Removal Procedure

  1. Apply the parking brake and chock the wheels.
  2. Remove the floor console left extension panel. Refer to Front Floor Console Extension Panel Replacement - Left Side (Acadia) or Front Floor Console Extension Panel Replacement - Left Side (Enclave) or Front Floor Console Extension Panel Replacement - Left Side (Outlook) .
    3. Fig 1: Identifying Transmission Range Selector Lever Cable Terminal And Retainer
    GM1861752Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the transmission range selector lever cable terminal (1) from the shift lever pin.
  4. Release the transmission range selector lever cable retainer (2) and remove the transmission range selector cable from the transmission control lever base.
    5. Fig 2: View Of Range Selector Lever Cable Terminal & Manual Shift Lever Pin
    GM1857737Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the transmission range selector lever cable terminal (4) from the transmission manual shift lever pin (5).
  6. Remove the retainer (1) from the transmission range selector lever cable.
  7. Press the locking tabs inward in order to release the transmission range selector lever cable (2) from the cable bracket (3).
  8. Remove the transmission range selector lever cable grommet (6) from the cowl panel.
  9. Remove the transmission range selector lever cable from the vehicle.
scientia non olet · About LEMON Manuals