Front Differential Drive Pinion Gear Bearing Cup and Lubricant Dam Replacement: Installation

Fig 1: View Of Front Differential Drive Pinion Gear Bearing Cup & Lube Dam

Courtesy of GENERAL MOTORS CORP.

Installation

Callout	Component Name
1	Front Differential Drive Pinion Gear Lube Dam Special Tools J 8092 Driver Handle J-46630 Lube Dam Installer. See Special Tools .
2	Front Differential Drive Pinion Gear Bearing Cup NOTE: Support the back side of the torque converter housing while installing the bearing cup. Install the bearing cup until it stops moving. Applying excessive pressure to the bearing cup once it is seated could cause damage to the torque converter housing casting. Special Tool: J-45087 Bearing Cup Installer. See Special Tools .

Callout

Component Name

Front Differential Drive Pinion Gear Lube Dam

Special Tools

J 8092 Driver Handle
J-46630 Lube Dam Installer. See Special Tools .

Front Differential Drive Pinion Gear Bearing Cup

NOTE: Support the back side of the torque converter housing while installing the bearing cup. Install the bearing cup until it stops moving. Applying excessive pressure to the bearing cup once it is seated could cause damage to the torque converter housing casting.

Special Tool:
J-45087 Bearing Cup Installer. See Special Tools .