35R and 456 Clutch Piston Air Check
35R and 456 Clutch Piston Air Check
| Callout | Component Name |
|---|---|
| 1 | Case Cover Assembly Tip: The fluid seal rings should be in place and not damaged. |
| 2 | Apply shop air to the 4-5-6 clutch feed. Observe the 4-5-6 piston movement.
NOTE:
Regulate the air pressure to 40 psi maximum. High pressure could cause the piston to over travel and damage the piston seals. Tip: Minimal piston movement and excessive air leaking could indicate damage to the 4-5-6 piston seals or improper assembly. |
| 3 | Apply shop air to the 3-5-Rev clutch feed. Observe the 3-5-Rev piston movement.
NOTE:
Regulate the air pressure to 40 psi maximum. High pressure could cause the piston to over travel and damage the piston seals. Tip: Minimal piston movement and excessive air leaking could indicate damage to the 3-5-Rev piston seals or improper assembly. |