1-2-3-4 Clutch Plates and Low Reverse Clutch Installation
1-2-3-4 Clutch Plates and Low Reverse Clutch Installation
| Callout | Component Name |
|---|---|
| 1 | 1-2-3-4 Clutch (Waved) Plate Tip: The tab on the clutch plate faces the bottom of the case. |
| 2 | 1-2-3-4 Clutch Plate (Qty: 2) Tip: The tab on the clutch plate faces the bottom of the case. |
| 3 | 1-2-3-4 Clutch (w/Friction Material) Plate Assembly (Qty: 2) |
| 4 | Low and Reverse Clutch Assembly |
| 5 | Low and Reverse Clutch Retaining Ring Tip: The retaining ring opening should face the control side of the case (9 o'clock). Do not align the retainer opening with other retaining ring openings. |