LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2008 >> Acadia SLT, AWD >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 6T70/6T75 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Diagnostic Information and Procedures >> Transmission Fluid Cooler Flushing and Flow Test (OUTLOOK) >> Clean-up

Transmission Fluid Cooler Flushing and Flow Test (OUTLOOK): Clean-up

  1. Disconnect the water supply hose from the SA9165T  and bleed any remaining air pressure from the flusher tank. See Special Tools .
  2. Remove the fill cap from the SA9165T  and return any unused flushing solution to its container. See Special Tools . Rinse the SA9165T  with water. See Special Tools . Do not store the SA9165T  with flushing solution in it. See Special Tools .
  3. After every third use, clean the SA9165T  as described in the instructions included with the tool. See Special Tools .
  4. Dispose of any waste water/solution and transaxle fluid in accordance with local regulations.
scientia non olet · About LEMON Manuals