Inflatable Restraint Vehicle Rollover Sensor Replacement

Fig 1: View Of Inflatable Restraint Vehicle Rollover Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
CAUTION: Refer to SIR Caution . Preliminary Procedures Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the front floor console. Refer to the appropriate procedure: With front floor console speaker, refer to Front Floor Console Replacement (Acadia)Front Floor Console Replacement (Enclave)Front Floor Console Replacement (Outlook) . Without front floor console speaker, refer to Front Floor Console Extension Panel Replacement - Right Side (Acadia)Front Floor Console Extension Panel Replacement - Right Side (Enclave)Front Floor Console Extension Panel Replacement - Right Side (Outlook) .
1	Inflatable Restraint Vehicle Rollover Sensor Nut (Qty: 3) NOTE: Refer to Fastener Notice . Tighten: 10 N.m (88 lb in)
2	Inflatable Restraint Vehicle Rollover Sensor Assembly Procedure Position carpet in order to access sensor. Disconnect the electrical connectors.

Callout

Component Name

CAUTION: Refer to SIR Caution .

Preliminary Procedures

Inflatable Restraint Vehicle Rollover Sensor Nut (Qty: 3)

NOTE: Refer to Fastener Notice .

Tighten: 10 N.m (88 lb in)

Inflatable Restraint Vehicle Rollover Sensor Assembly

Procedure