Sunroof Motor/Actuator Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: It is only necessary to lower the headliner. Only do those step in headliner replacement that will lower the headliner enough to gain access to the part. Refer to Headlining Trim Panel Replacement . |
|
| 1 | Sunroof Window Motor/Actuator Screw (Qty: 3)
NOTE:
Refer to Fastener Notice
. Procedure: Disconnect the electrical connector. Tip: When removing the motor/actuator the cables and tubes stay with the module. Tighten: 3 N.m (27 lb in) |
| 2 | Sunroof Window Motor/Actuator Procedure: Initialization/Teach motor/actuator, refer to Sunroof Motor/Actuator Initialization/Teach Process (Existing Motor) or Sunroof Motor/Actuator Initialization/Teach Process (New Roller Sunshade) or Sunroof Motor/Actuator Initialization/Teach Process (Existing Roller Sunshade) or Sunroof Motor/Actuator Initialization/Teach Process (New Motor) . |