Front Floor Rear Console Front Cover Replacement
| Callout | Component Name |
|---|---|
|
Preliminary Procedures
|
|
| 1 | Front Floor Console Armrest Assembly Bolt (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 2 | Front Floor Console Armrest Assembly Procedure: Position the armrest assembly out of the way leaving the electrical harness attached. |
| 3 | Front Floor Upper Console Trim Plate Procedure: Lift the rear of the trim plate first, releasing the retainers securing the trip plate to the console assembly. |
| 4 | Retainer Clips (Qty: 4) |