Rear Seat Number 2 Retractor Side Belt Replacement

Fig 1: Identifying Rear Seat Number 2 Retractor Side Belt

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the rear quarter upper trim panel. Refer to Rear Quarter Upper Trim Panel Replacement (without RPO E61) or Rear Quarter Upper Trim Panel Replacement (with RPO E61) . Remove the rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement (Acadia/OUTLOOK with E61) or Rear Quarter Lower Trim Panel Replacement (Acadia/OUTLOOK without E61) or Rear Quarter Lower Trim Panel Replacement (Enclave with E61) or Rear Quarter Lower Trim Panel Replacement (Enclave without E61) .
1	Rear Seat Number 2 Shoulder Belt Anchor Bolt NOTE: Refer to Fastener Notice . Tighten: 45 N.m (33 lb ft)
2	Rear Seat Number 2 Shoulder Belt Guide Adjuster Bolt Tighten: 45 N.m (33 lb ft)
3	Rear Seat Number 2 Shoulder Belt Retractor Bolt Tighten: 45 N.m (33 lb ft)
4	Rear Seat Number 2 Shoulder Belt Retractor Assembly