Rear Number 2 Seat Replacement

Fig 1: Identifying Rear Number 2 Seat

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Seat No. 2 Assembly Bolt (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 55 N.m (41 lb ft)
2	Rear Seat No. 2 Assembly (Qty: 2) Tip: Lift the seat upward at the rear of the seat and slide the seat rearward to disengage the adjuster hooks holding the seat to the floor pan.