Case Cover and 3-5-Reverse and 4-5-6 Clutch Housing Removal

Fig 1: Identifying Case Cover, 3-5-Reverse & 4-5-6 Clutch Housing

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	A/Trans Case Cover Assembly Bolt M6 x 30 (Qty: 10)
2	A/Trans Case Cover Assembly NOTE: Use care when pulling the input speed sensor wire harness through the case to avoid damaging the harness.
3	A/Trans Case Cover Gasket Tip:  The gasket is not reusable.
4	Input Shaft Thrust Bearing Assembly Tip:  The bearing may be stuck to the case cover.
5	3-5 Rev / 4-5-6 Clutch Housing Assembly