2-6 Clutch Piston Installation

Fig 1: View Of 2-6 Clutch Piston

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	2-6 Clutch Piston Tip: J-46621 prevents the piston seal lip from damage over the retaining ring groove during installation. See Special Tools . Apply a thin coat of ATF to the O.D. of J-46621 to ease the installation of the piston. See Special Tools . Special Tool: J-46621 Seal Protector. See Special Tools .
2	2-6 Clutch Spring Assembly
3	2-6 Clutch Spring Assembly Tip: Install the retaining ring with the opening positioned to the top of the case cover. Place the retainer ring inside J-46632 prior to placing J-46632 onto the spring. See Special Tools . Special Tool: J-46632 Spring Compressor. See Special Tools .