Front Floor Console Accessory Housing Replacement (Acadia)

Fig 1: Identifying Front Floor Console Accessory Switch Mounting Plate (Acadia)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front floor console accessory trim plate. Refer to Front Floor Console Accessory Trim Plate Replacement (Acadia) or Front Floor Console Accessory Trim Plate Replacement (Enclave) or Front Floor Console Accessory Trim Plate Replacement (Outlook) .
1	Front Floor Console Accessory Switch Mounting Plate Screw (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Front Floor Console Accessory Switch Mounting Plate Procedure Disconnect the electrical connectors. When replacing the front floor console accessory switch mounting plate, transfer all necessary components.

Callout

Component Name

Front Floor Console Accessory Switch Mounting Plate Screw (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

Front Floor Console Accessory Switch Mounting Plate

Procedure

Disconnect the electrical connectors.
When replacing the front floor console accessory switch mounting plate, transfer all necessary components.