Torque Converter Cover Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: View Of Torque Converter Covers & Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures: Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
1	Torque Converter Cover Bolt NOTE: Refer to Fastener Notice . Tighten: 10 N.m (89 lb in).
2	Torque Converter Cover Tip: Remove the starter. Refer to Starter Motor Replacement .
3	Torque Converter Cover Bolt Tighten: 10 N.m (89 lb in).
4	Torque Converter Cover