LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Yukon Denali >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case - NVG 246-NP8) >> Repair Instructions >> Transfer Case Shift Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Shift Control Module Electrical Connectors
    GM885116Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the shift control module electrical connectors.
    2. Fig 2: View Of Shift Control Module
    GM856631Courtesy of GENERAL MOTORS CORP.
  2. Unsnap and remove the shift control module from the bracket.
scientia non olet · About LEMON Manuals