LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Yukon Denali >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case - NVG 246-NP8) >> Diagnostic Information and Procedures >> Transfer Case High/Low Clutch Reset >> Using a Scan Tool

Using a Scan Tool

WARNING: This page is about a different variant/trim than selected.
  1. Go to the special functions heading in the scan tool.
  2. Select Clutch Reset Procedure.
  3. When the Clutch Reset Procedure is initiated you should hear the motor engage, at the same time view the Clutch Motor Learned Position Voltage on the scan tool it should go to 0.6 volts and back to 0 volts indicating a successful learn procedure.
scientia non olet · About LEMON Manuals