LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Yukon Denali >> Repair and Diagnosis >> External Pages >> Different car >> Section 892 (Automatic Transmission - 4L80-E/4L85-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Transmission Oil Pump Body to Gear Face Clearance Check

Transmission Oil Pump Body to Gear Face Clearance Check

WARNING: This page is about a different car, the 2007 GMC Yukon XL and 2007 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Checking Transmission Oil Pump Body To Gear Face Clearance
    GM181744Courtesy of GENERAL MOTORS CORP.
  1. Place a straight edge across the face of the oil pump body assembly (203) and the faces of the oil pump gears (204, 205).
  2. Measure the clearance between the straight edge and the faces of the oil pump gears. The proper clearance is between 0.017-0.071 mm (0.0008-0.0028 in).
scientia non olet · About LEMON Manuals