LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Yukon Denali >> Repair and Diagnosis >> External Pages >> Different car >> Section 892 (Automatic Transmission - 4L80-E/4L85-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Third and Fourth Clutch Accumulator Housing Removal

Third and Fourth Clutch Accumulator Housing Removal

WARNING: This page is about a different car, the 2007 GMC Yukon XL and 2007 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating 3rd & 4th Clutch Accumulator Housing Bolts
    GM40608Courtesy of GENERAL MOTORS CORP.
  1. Remove the 3rd and 4th clutch accumulator housing bolts (53).
  2. Remove the 3rd and 4th clutch accumulator housing (51).
  3. Remove the accumulator housing gasket (47). The accumulator housing gasket (47) may be stuck to the control valve body spacer plate (46).
  4. Remove the 3rd clutch accumulator piston spring (50).
  5. Remove the 4th clutch accumulator piston spring (49).
  6. Remove the control valve body spacer plate (46).
  7. Remove the control valve body gasket (45) from the control valve body spacer plate (46).
scientia non olet · About LEMON Manuals