LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Yukon Denali >> Repair and Diagnosis >> External Pages >> Different car >> Section 892 (Automatic Transmission - 4L80-E/4L85-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Third and Fourth Clutch Accumulator Housing Assemble

Third and Fourth Clutch Accumulator Housing Assemble

WARNING: This page is about a different car, the 2007 GMC Yukon XL and 2007 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of 3rd Clutch Accumulator Piston Inner & Outer Seals
    GM40611Courtesy of GENERAL MOTORS CORP.
  1. Install the 3rd clutch accumulator piston inner (406) and outer (404) seals. Lubricate the seals (404, 406) with DEXRON®VI automatic transmission fluid.
  2. Install the 3rd clutch accumulator piston (405) into the 3rd and 4th clutch accumulator housing (51).
    3. Fig 2: Identifying 4th Clutch Accumulator Piston Assembly
    GM56547Courtesy of GENERAL MOTORS CORP.
  3. Install the 4th clutch accumulator piston seal (404). Lubricate the seal (404) with DEXRON®VI automatic transmission fluid.
  4. Assemble the 4th clutch accumulator piston pin (408) with the 4th clutch accumulator piston (407).
  5. Install the 4th clutch accumulator piston assembly.
  6. Install the 4th clutch accumulator piston pin retainer ring (402).
scientia non olet · About LEMON Manuals