Output Shaft Seal Removal

WARNING: This page is about a different car, the 2007 GMC Yukon XL and 2007 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 6125-1B Slide Hammer. See Special Tools .
J 23129 Universal Seal Remover. See Special Tools .

Fig 1: Identifying Output Shaft Seal Retainer Ring

Courtesy of GENERAL MOTORS CORP.

Remove the output shaft seal retainer ring (14).
Inspect the output shaft seal retainer ring (14) for damage.

Fig 2: Installing Output Shaft Seal

Courtesy of GENERAL MOTORS CORP.

Using the J 23129 and the J 6125-1B , remove the output shaft seal (13). See Special Tools .