Rear Quarter Upper Trim Panel Replacement (with RPO E61)

Fig 1: Identifying Rear Quarter Upper Trim Panel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the seat belt anchor bolt. Refer to Rear Seat Number 2 Retractor Side Belt Replacement .
1	Rear Quarter Upper Trim Panel Screw NOTE: Refer to Fastener Notice . Tip: Open the access door to remove screw. Tighten: 3 N.m (27 lb in)
2	Rear Quarter Upper Trim Panel Assembly Tip: Route the seat belt through the trim panel.

Callout

Component Name

Preliminary Procedure

Disable the SIR system. Refer to SIR Disabling and Enabling .
Remove the seat belt anchor bolt. Refer to Rear Seat Number 2 Retractor Side Belt Replacement .

Rear Quarter Upper Trim Panel Screw

NOTE: Refer to Fastener Notice .

Tip: Open the access door to remove screw.

Tighten: 3 N.m (27 lb in)

Rear Quarter Upper Trim Panel Assembly
Tip: Route the seat belt through the trim panel.