Knee Bolster Replacement

Fig 1: Identifying Knee Bolster

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the hood latch release handle assembly. Refer to Hood Latch Release Handle Replacement .
1	Knee Bolster Assembly Procedures Disconnect the electrical connections. When replacing the knee bolster, transfer all necessary components.
2	Retainer Clips (Qty: 5)

Callout

Component Name

Preliminary Procedure:
Remove the hood latch release handle assembly. Refer to Hood Latch Release Handle Replacement .

Knee Bolster Assembly

Procedures

Retainer Clips (Qty: 5)